Brad
The stainless steel hoses should not have this problem as far as I
know.
Check to make sure the rear wheel cylinders can float. They are in a slot
and are suppose to float back and forth some.
I would also bled the lines and make sure there is no contamination in the
fluid.
Ron Fraser
-----Original Message-----
From: Hall Motors [mailto:hallmotors@cox.net]
Sent: Saturday, April 17, 2010 11:43 AM
To: rfraser@bluefrog.com; 'Randy Smith'; tigers@autox.team.net
Subject: RE: [Tigers] Rear Brake Shoe Drag
Thanks to all; I've had the drums off and inspected the shoes, etc., but
hadn't considered the flexible line. All three (2 up front and 1 in back)
are the stainless steel style and I don't know when they were installed
(I've had the car for two years). Do the stainless style flexible lines
have rubber liners; if not, are they still subject to the same constriction
problem?
Thanks Again,
Brad Hall
B382000609LRXFE
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|