Thanks for the information. I noticed nobody talked about the McLeod or Ram
clutches. Are the Centerforce clutches better than these for some reason?
Thanks. Mauro B382001355LRXFE
On 4/12/10 7:21 PM, "Jerry & Maureen (Mo)" <JCMC2006@suddenlink.net> wrote:
> Mauro,
> You can upgrade to a more modern needle pilot bearing too.
>
> Jerry Christopherson
> 9473187
>
> -----Original Message-----
> From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
> On Behalf Of Ron Fraser
> Sent: Monday, April 12, 2010 3:24 PM
> To: m_dangelo@verizon.net; TIGERS@AUTOX.TEAM.NET
> Cc: TIGERS@AUTOX.TEAM.NET
> Subject: Re: [Tigers] Best Clutch Kit 289
>
> Mauro
> The Tiger engine, clutch and transmission are all Ford parts. There
> is nothing special about the Tiger clutch.
> The difference is whether you have a 5 bolt engine or a 6 bolt engine block.
> The 5 bolt has a 10.5" flywheel and the 6 bolt has an 11" flywheel.
>
> Original pilot bearing - C2OA-7600-A I believe this bearing is used in
> all 289 engines also.
>
> Ron Fraser
>
> -----Original Message-----
> From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
> On Behalf Of m_dangelo@verizon.net
> Sent: Monday, April 12, 2010 2:55 PM
> To: TIGERS@AUTOX.TEAM.NET
> Cc: TIGERS@AUTOX.TEAM.NET
> Subject: [Tigers] Best Clutch Kit 289
>
>
> Hi all. I am getting ready to buy a clutch for my 289 engine. The engine
> is built to produce about 300HP (or just a bit less), so I am guessing I'll
> need a clutch rated for more than stock power. I expect to drive the car
> occasionally and at least 99% on the street. The flywheel is the old stock
> 160 tooth flywheel, which has been resurfaced, by the way. So, I am a bit
> clueless as to which clutch kit to buy. First, is there anything special
> about the Sunbeam Tiger, in that it needs a special type of clutch? I am
> considering the RAM Musclecar clutch and the McLeod MCL75113 diaphram clutch
> from Summit Racing. I seem to remember Doug Jennings recommending a
> diaphragm
> clutch to me... David Kee Toploaders as a clutch made especially for
> Sunbeam
> Tigers, whatever that means. I would like to keep the expense of a clutch
> at or lower than the McLeod ($235). Does anyone have any experience with
> choosing a clutch for a Tiger? I would really appreciate your advice and
> opinions of the two clutch kits mentioned above (from Summit Racing), as
> well as the David Kee clutch. I also have to buy a pilot bearing and don't
> know if that was a special bearing for the Tiger only. Any idea? Thanks
> very much! Mauro _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.437 / Virus Database: 271.1.1/2804 - Release Date: 04/12/10
> 06:32:00
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/jcmc2006@suddenlink.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|