Hello All:
I am in the process of replacing the dashboard on my Tiger and have come
across a couple of things that are a bit puzzling.
Behind the dash, as you know, is a large bundle of wires that run from
one side of the car to the other, all wrapped together with vinyl tape.
I noticed when I removed my dash that there is a clamp around the bundle
of wires just to the left of the steering column. It obviously should
be attached to something by way of a through bolt to help support the
bundle of wires, but I cannot figure out where it should be attached.
There doesn't seem to be any obvious attachment point within easy reach
of the clamp. I can slide the clamp along the bundle so it is not clear
if it is in its original position. Not too long ago I had the steering
column removed and rebuilt, so I suspect that the clamp was undone at
that time and not put back. Anybody have any thoughts on this?
The second mystery has to do with a small bracket that I discovered when
I removed my original 43-year-old dash for the first time. Mounted on
the back of the dash at about 1 o'clock above the ammeter, when viewed
from the back side, is a bracket which is screwed to the dash. There is
a tab which is flush with the dash through which a wood screw passes and
attaches it to the dash. At right angles to the tab is a circular ring
with an o.d. of 15/16 in. and an i.d. of 5/8 in. On close examination,
I find no marks on the bracket that indicate that it ever held
anything. What the heck is this and what is it doing there?
Thanks in advance for your help.
Tod
B382002384LRXFE
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|