Jim
Try Red wire to switch terminal #1 and Brown wire to #4, ground wire on #6.
Ron Fraser
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of James E. Pickard
Sent: Wednesday, August 26, 2009 11:05 PM
To: tigers@autox.team.net
Subject: [Tigers] Wiper wiring
I need help with the wiring for the wipers, and the wiring diagram is of
minimal use. The diagram shows four wires on the wiper motor: a green wire
on terminal 1, a red & lt. green wire on terminal 2, a brown & lt. green
wire on terminal 3, and a ground. It shows the switch with two unlabeled
terminal plus a ground.
Now here is the problem. I have three wires bundled together coming off the
motor - one is sort of red, one is sort of brown, and one is sort of green.
I plugged the sort of red wire into the red/lt. green, the sort of green
into the green, and the sort of brown into the brown/lt. green. The
brown/lt. green and red/lt. green wires are plugged into the grounded switch
although I'm not sure which terminals they should be attached to.
The wipers come on the minute I turn on the ignition and remain on no matter
what the switch setting. In fact, the wipers remained on even after
unplugging the red/lt. green wire from the switch! I had to unplug the
green wire at the motor to kill the wipers. Needless to say, I've got it
wired up wrong and need help.
BTW, is this a one-speed or two-speed wiper.
Thanks.
Jim Pickard
B9473298 ('65 Tiger)
AN5L/12109 ('59 Sprite) - sold
2003 Mini Cooper
Lafayette, LA
You are subscribed as rfraser@bluefrog.com
Tigers@autox.team.net http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.66/2325 - Release Date: 08/25/09
18:07:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|