Would you be interested in the K&N size? I put in a K&N E-3710. Height
2", ID 11.75, OD 13.5". It fits (having reshaped the circle to an oval)
perfectly.
The E-2859 (listed as the Tiger filter) has the same ID and OD, but is
1.5" tall.
The FRAM CA3371 is listed as 1.88 high, 11.31 ID, 13.55 OD... That MIGHT
fit. The application for this one is '75-76 Mustang V8 2 bbl.
Cheers,
Theo
> -----Original Message-----
> From: tigers-bounces@autox.team.net
> [mailto:tigers-bounces@autox.team.net] On Behalf Of Samouce's
> Sent: June 15, 2009 3:54 PM
> To: tigers@autox.team.net
> Subject: [Tigers] Air filter drama...easy...no.
>
> So I need a new air filter for my upcoming trip.
>
> Too easy, I have an AC A350C on the car now. I am also armed
> with CAT shop notes and a list of other filter that should work.
>
> Fram CA-114, CA-148PL - can't get
> AC 335C - can't get
> Motocraft FA-41 - can't get.
>
> The filter that is on the car AC A350C - does not cross.
>
> So the only thing that would come close is a FA-186 which is
> 2.2" high and will most likely be too tall. I have a F4B
> manifold and very little room to the hood.
>
> So, what are you guys using? I am NOT interested in the K&N
> hype or price.
>
> Thanks!
>
> Duke
> B382002037
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|