I too have removed and reinstalled the front cross member in both my
tigers. I have only done this with both A-arms in place, and normally
with the tires in place. There have been times when there was binding.
In every case the angle was wrong. I usually have the body suspended
from above or stationary on jack stands. I have used a floor jack to
rotate the front suspension to the appropriate angle to slip past the
frame rails. I actually believe that having the tires in place is a plus.
Contact me off line if you wish more details.
Harry Elam
B382002027 Long gone
B382000471 my only street car.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|