> -----Original Message-----
> From: tigers-bounces@autox.team.net
> [mailto:tigers-bounces@autox.team.net] On Behalf Of Ron Fraser
> Sent: November 17, 2008 8:57 AM
> To: Rollright@aol.com; tigers@autox.team.net
> Subject: Re: [Tigers] big rubber gas-tank filler tube
>
> Jim
> Seems to me the easiest way is to:
>
<snip>
> Inspect the small hose for cracks just in case it needs
> replacement or a short section cut off.
<snip>
... Also inspect the small hose for drill holes left by Lift-the-Dot
stud installation.
;)
-Theo
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|