Many wire sets have both terminals for the cap, but you often have to look at
the universal sets instead of specific applications. I think the Taylor 409
had old style and new style (HEI towers ) in 90 for the distributor ends. The
sparkplug end is always the one is easy to find. Not sure if your car has
headers or not but I have found the 135 angle on the sparkplug ends a good
option (This was on my early mustang). Hit a couple of the sites directly them
may show package contents (MSD, Taylor) or have a better description. Also MSD
Tech support usually respondes witnin a day or so if you have specific
questions and have been helpful in the past for me
Sandy
----- Original
Message ----
From: Nathan Johnson <vesselofgrace@hotmail.com>
To:
tigers@autox.team.net
Sent: Saturday, November 15, 2008 11:09:48 PM
Subject:
[Tigers] MSD wire set
Can anyone recommend which MSD wire set has the correct
length wires for a 289
but has standard 90 degree (non-socket) ends for both
the distributor and the
spark plug end?
_________________________________________________________________
Windows Live
Hotmail now works up to 70% faster.
http://windowslive.com/Explore/Hotmail?ocid=TXT_TAGLM_WL_hotmail_acq_faster_1
12008
_______________________________________________
Support Team.Net
http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|