I jumped in late here, but don't use that if the sender is in the main stream
of the oil it will be a nice big restriction in the small -8 oil lines. I
don't know if you can get a fitting for the pan's drain bolt that would be a
good option. I think I have seen other adapters like that but better since
they don't restrict the flow of oil for example -
http://www.pegasusautoracing.com/productselection.asp?Product=1227
Sandy
----- Original Message ----
From: Owain Lloyd <owain.lloyd@gmail.com>
To:
"tigers@autox.team.net" <tigers@autox.team.net>
Sent: Thursday, September 18,
2008 11:51:01 AM
Subject: [Tigers] issues with tapping the oil filter lines
i
run an oil filter in the wheel arch with -8AN hose to a block
adapter. i'm
trying to find an easy place to mount an oil temperature
sender and i'm
wondering if i could just put a fuel pressure gauge
adapter between the oil
block adapter and the hose end. i'm thinking
of something like this:
http://store.summitracing.com/partdetail.asp?part=RUS-670350 and then
just
screwing the oil temp sender (which looks like this:
http://store.summitracing.com/partdetail.asp?part=ATM-2253) into that.
any
potential issues with impeding the flow of oil do you think?
_______________________________________________
Support Team.Net
http://www.team.net/donate.html
You are subscribed as sganz@pacbell.net
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|