my supplier over here says its not possible to do that but there are
some holes drilled in the crank weights and the vibrations were not
terrible so i strongly suspect someone has tried that.
i guess i'll know by the vibrations after i start it up again.
if this is the case i'll have to get a new crank and rebalance the
assembly. that'll be fun - trying to find somewhere in the uk to do
that and pay less than $1500 :(
On Fri, Jun 13, 2008 at 3:08 PM, Gary Crandall <maliburevue@yahoo.com> wrote:
> Owain,
>
>
>
> Has the 28 0z. crank been rebalanced to 50 oz.? Does anyone on the Tiger
> list know if that is possible and if yes, what to look for, or if it was it
> done incorrectly? You may want to call an engine machine shop to confirm.
>
>
>
> Gary
>
>
>
> --- On Fri, 6/13/08, Owain Lloyd <owain.lloyd@gmail.com> wrote:
>
> From: Owain Lloyd <owain.lloyd@gmail.com>
> Subject: Re: [Tigers] flywheel surprise
> To: rfraser@bluefrog.com
> Cc: "Tiger's Den" <tigers@autox.team.net>
> Date: Friday, June 13, 2008, 6:11 AM
>
> holy cow!
> i just checked my crank and its marked "2M" on the front counter
> weight which i understand is a 28oz crank. its had a 50oz flywheel on
> there since i bought the car 5000 miles ago!
>
> i'd better order a 28oz flywheel and balancer.
>
> on the up side, there is already a windage tray installed.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|