Re: [Tigers] fuel pump plumbing

["Smit, Theo" <Theo.Smit@dynastream.com>]

It's a 5/16 inch compression fitting. I cut the 5/16" pipe off about 3
inches away from the compression fitting, then soldered the stub to a
piece of 3/8" line that I ran into the spare tire well, where it plumbs
into a can-style fuel filter (with another compression fitting) and from
there to a pump.

Cheers,
Theo
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive