Draw a pattern of the door glass before you remove the lower channel. The
bottom will be straight across from back to front. Put the glass on a work
bench covered with carpet or cardboard to protect it from breaking on a hard
surface. Hold the glass lower sash channel up, tap with hammer (like your
putting it on)this will help loosen 40 years of rust and dirt. Then lay the
glass
flat and drive the sash off with a suitable tool. We use a brick wedge and
hammer with the wedge ground flat so it will just catch the channel. Or take
it
to an auto glass shop and they can pull it for you. Clean it up and paint it
and you will be good for another 40 years. Be sure to grease the roller
channel. HTH
_______________________________________________
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
|