Listers -
I'm looking for some tips to adjust the windshield angle relative to the
door wing window.
I have the windshield adjustment nuts installed from Sunbeam Specialties.
The driver's side is adjusted with over 1/4 inch of gap between the top of
the adjustment nut and the bottom of the windshield frame and there's still
contact with the door wing at the top of the wing triangle. It seems too
much "adjustment" will keep the body-windshield frame seal from working as
intended. (The passenger side does not have the windshield adjustment nut
installed because the windshield-door gap is just right without it.)
Next attempt is to use a wood spacer between windshield frame and window
wing to set the driver's side gap before tightening the 7 windshield nuts.
Any other ideas?
Cheers,
Graham Harlowe
B382001466
_______________________________________________
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
|