Hi all,
My tiger came from the PO with one of the studs missing that helps hold the
conv top and tonneou cover in place. There has been a spare rolling in the
console and I thought I would install it before I managed to loose it. The
stud is the one right behind the passenger door. I got the passenger side
piviot point of the convertible top loose and moved out of the way. I assumed
there would be an access hole behind it to install the nut on the stud, but no
hole. I can't figuire out how you would install that stud. I'd rather not
dissassemble anything else if I don't know how to access the back of that
panel.to get that nut on there. Any suggestions?
Thanks,
Steve
|