tigers
[Top] [All Lists]

valve cover removal

To: tigers@autox.team.net
Subject: valve cover removal
From: Carmods@aol.com
Date: Sat, 26 May 2007 08:43:37 EDT
Here's a tip,
 
Once you get the right valve cover off, hammer the sheet metal up that  hangs 
over the valve cover for more clearance. If you are aggressive you can  gain 
about 1/2 inch which helps a lot. You can touch up any paint you damage and  
it won't show an since it is hidden by the valve cover.
 
Another bit of information, if you have a 302 with the larger stamped  
rockers, it's much harder to get the right cover off so plan  on removing the 
right 
engine mount.
 
John Logan







<Prev in Thread] Current Thread [Next in Thread>
  • valve cover removal, Carmods <=