> I'd like to know how you change holes on the lift bar in full
> flight.....
> .
> Dave, the lift plate has three holes. You use the front when lifting the
> engine/tranny out of a Tiger. Using the front hole allows the pair to be
> on an angle to facilate removal. Once out of the car I use the second
> chain fall on the monorail and insert a shackle in the middle hole, which
> when lifted by the second chain fall the engine/tranny become level, I
> then remove the hook from the first chainfall. Any questions? I would be
> happy to answer.
> regards, Tony
|