Call Smitty at 619 233-7937. He has an original fuel line segment that he
uses as a template. We made one for my Tiger about a month ago.
The stock line runs under the starter motor and along the side of the block
. It turns up and runs vertically in front of the generator bracket. The
stock fuel filter is oriented vertically just in front of the generator
bracket. Another line goes from the top of the fuel filter to the carb
inlet.
There is a flat bracket that attaches to the bottom starter motor mounting
bolt. The bracket is flat with two holes. One for the bolt the other for a
rubber grommet that protects the fuel line.
The second bracket bolts to a 7/16th tapped hole in the side of the block
near the front just above the oil pan. The bracket is L shaped. The free
end loops around the tube and has a sheet metal screw to pinch it tight to
the tube.
Erich
----- Original Message -----
From: <PhastPhill@aol.com>
To: <tigers@autox.team.net>
Sent: Wednesday, August 31, 2005 3:27 PM
Subject: Fuel line
> While I'm fitting my headers would like to replace the 3 or 4 ft of rubber
> fuel line to the carb with some thing aproaching org. Metal lines came
from the
> rear, can't find a pic of them in manual, any help for routing the fuel
line
> close to orginial would be appreciated. At least my heater valve is in
the
> right spot....cheers
|