Hi all,
I rebuilt my Mk2 servo last year and like Joey within a week or so it
started hanging up.
A local tiger expert suggested that if the leather seal on the big piston
was in good condition (it was) I remove the foam cord that came with the
rebuild kit that is used to enhance the sealing abilty of a used leather
seal.
I removed the foam cord from behind the seal, re-greased the leather with
the stuff provided in the rebuild kit, and the servo has worked fine ever
since.
regards
Bob
wow, well another great idea, with the hill idea. Maybe if i put in the old
one or something. I will try the hill idea first, and then if that dosnt
work. Well then im going for your idea. And hopefully i will get one to work.
Yes, the seal was a little tight when i put it in. But i thought with the
vacume and spring would not matter.
Thank you for all the help from everyone.
Joey Hiykel 1966 Tiger MK1A
B382001072 LRXFE JAL# 661104
|