yes it has all that, and i have the gear off, and the cable is the
correct one. Right now the new cable looks the same on both ends, well
except for the nut which goes on the speedo. And i do have the gear
off, but the clip that holds the gear on, cant hook to anything, cuz
there is just the speedo cable, which is too small for it to hook too.
And the thing that the clip hooks too is what im talking about. Thats
what i need to get off, and i cant. So............. i guess if no one
else knows how/ or what, then i will take it to a shop here and see
what they can figure out.
thanks Joey
-----Original Message-----
From: Ron Fraser <rfraser@bluefrog.biz>
To: caseyh4312@aol.com; tigers@autox.team.net
Cc: achd73@yahoo.com; tonythetiger@onecliq.net
Sent: Thu, 7 Apr 2005 00:35:05 -0400
Subject: RE: Speedo Cable
Joey
Speedometer cables rarely come with a drive gear because there are
several different tooth count gears Ford used for all it's production
lines.
There should be a spring clip that holds the gear onto the outer cable
end
and that is all you need for the new cable to make it work. The
speedometer core cable is square which fits into the square hole in the
gear.
Are you sure you have the correct replacement Speedo cable? It should
look
exactly like the one you removed, same size, same diameter, same length,
same end fittings.
You may need to post a picture of this so we can see the problem.
Ron Fraser
-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net]
On
Behalf Of caseyh4312@aol.com
Sent: Wednesday, April 06, 2005 10:38 PM
To: tigers@autox.team.net
Cc: achd73@yahoo.com; tonythetiger@onecliq.net
Subject: Speedo Cable
hey guys,
i am replacing my speedo cable, and the new one dosent have the gear on
it, that goes into the end of the tranny. well i got the gear off, but
there is something else under that, that i need to get off. I looked
all around on it, and there is no set screws or anything. And i tried
pulling it, but it dosent budge. Is that suppose to come off? If not,
then im assuming that i need to get a new gear set, or something for
the tranny side.
please help. This is the last thing that i need to do, so im anxious.
JOEY HIYKEL
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.4 - Release Date: 4/6/2005
|