tigers
[Top] [All Lists]

Re: LAT 70 Wheel spinners

To: Caseyh4312@aol.com
Subject: Re: LAT 70 Wheel spinners
From: Steve Laifman <SLaifman@socal.rr.com>
Date: Thu, 10 Mar 2005 13:55:04 -0800
Joey,

Check out close-up of my 3 eared knock-off's from "American Racing", as 
used on the Ken Miles prototype Tiger above on TigersUnited.com
http://www.tigersunited.com/techtips/tech_threads/tt-wheel.asp

These particular versions have the Sunbeam Specialties name plate 
sticker, as used on the LAT-70, and they screw-on large 52 mm threads 
exactly like real knock-offs, but they are a cast decorative item not 
meant for a hammer. There is a set screw on the side to hold it on, and 
it must be loosened, and the knock-off rotated, to get at the wheel lug 
nuts.  They were also available with screw-on hex exterior that was used 
after knock off ears were made illegal on new cars.  Story goes that a 
policeman barked his shin on one.

A lot of other wheels on this page, as well.

American Racing no longer makes these wheels, but the 3 eared caps are 
available from THEIR supplier in both screw-on 52 mm threads, as well as 
the LAT 70 type with a center sheet metal screw put on from the back.  
The should be available at tire stores that sell specialty wheels.

Steve

Caseyh4312@aol.com wrote:

>here are the ones that i am looking  at to get if they fit. 
> 
>_http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4533773737&sspa
>gename=ADME%3AX%3AON%3AUS%3A2_ 
>(http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4533773737&sspagename=ADME:X:ON:US:2)
> 
> 
>thanks again
> 
>Joey Hiykel  1966 Tiger MK1A
>B382001072 LRXFE JAL#  661104





<Prev in Thread] Current Thread [Next in Thread>