I think classic tube(they advertise in Mustang Monthly mag) carry some of
the Tiger brake/clutch and fuel lines.
The stock tube will come out of the car with no trouble. Disconnect both
ends and release all the clips and thread it out. Just get the car up on
jackstands and do it.
Smitty at 619 233-7937 has original lines to use as patterns. I am sure he
could bend up a new one for you. Stoc fuel lines are very ductile, you can
bend them without breaking. If you get carried away you can kink them shut.
I think the stock line from the pump to the carb is two pieces. Mine has
been modified from stock to eliminate some tendencies for vapor locking in
the stock location.
Erich
----- Original Message -----
From: <Caseyh4312@aol.com>
To: <tigers@Autox.Team.Net>
Sent: Saturday, December 18, 2004 3:20 PM
Subject: fuel system
> i am replacing my fuel system and i am in need of some parts.
> does any 1 know where i can get a new fuel hose that goes from the
crossover
> tubes to the fuel pump? And how to get it off. Cuz it has like 6 curves
in
> it. And it has to go over the sway bar. And the hoses are steel. Are
there any
> replacments that can bend a little and not break for easier installation?
>
> Also does the hose running from the fuel pump to the carb split in 2? Or
is
> it all 1 line. Cuz i have to get that out too. Can i get any advice??
>
> Joey Hiykel 1966 Tiger MK1A
> B382001072 LRXFE JAL# 661104
|