Moonstone,
Thanks! That's what I figured but I have no experience with slip joints on
headers. The pin hole I discovered was obviously a leak but the pressure
test showed my fix worked there. The only other leaks detected were at the
slip joints.
Frank
B9471116
_____
From: Drmoonstone@aol.com [mailto:Drmoonstone@aol.com]
Sent: Monday, October 04, 2004 5:39 PM
To: itswonderful@comcast.net; tigers@autox.team.net
Subject: Re: Leaky Header Collectors
Many header types use slip joints and this presents little problem. When
using a product like Cermakrome small pinhole leaks become obvious. These we
weld before application of the Cermakrome. The slip joint will only leak if
there is excessive back pressure.
Moonstone
|