Chris
I believe Sunbeam Specialties carries this seal, that seal is not in
the rebuild kits.
If all you have done is just split the caliper apart and you have not
disturbed the seal you can probably reuse it.
I have done this several times. You need to inspect the seal to
make sure it is in good shape and all surfaces of the seal and caliper need
to be clean for assembly. Torque the assembly to spec and be sure to check
the calipers for any leaks after you install them on your car.
Exhaust system;
There are 8 rubber isolators that mount the muffler and tail pipe to the
car. I believe Sunbeam Specialties has the parts.
Ron Fraser
-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net] On
Behalf Of Chris Mottram
Sent: Sunday, August 08, 2004 10:42 AM
To: tigers@autox.team.net
Subject: Front brake caliper rebuild
I removed my front caliper and split it in half before
reading the manual (i.e. don't split it open - dummy).
Is it time to send it to the rebuild shop or can I
replace the seal (does that come in the rebuild kit)
and tighten using torques wrench to proper spec?
Thanks - I need to stop creating more work for myself
on this thing....
Chris
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.735 / Virus Database: 489 - Release Date: 8/6/2004
|