Wally,
I have an original T-10 in my Tiger and the model number and tag number
matches what I have. The speedo cable connection should however be on the
left side, next to and on the same side as the shifter assembly. If you are
restoring B9471793, I would use a Top-loader transmission they are much
easier to rebuild and get parts for and is correct for your number car.
Dan Fitzgerald
B9470033
>Hi Folks
>
>I've just been pulling all the bits out of a second Tiger I have here and
>found that the transmission that came with the car is not the original
>Toploader but a T10. The bolt patttern looks like it will fit the standard
>bell housing, but the tail housing looks a bit shorter than the stock Tiger
>one. The speedo connection is on the rights side instead of the left.
>
>The code cast on the side of the box is as follows:
>
>T10B-1
>W.G DIY
>W1
>Serial number on tag: 30A-G-1
>
>Can any of you Ford followers tell me what this is off?, and if it will fit
>the Tiger?
>I remember reading that the original early batch of Tigers had this
>transmission?
>
>Regards
>Wally Menke
>B9471793
>
>
>
--
Steve Laifman
Editor
http://www.TigersUnited.com
|