> > Hi all,
> > I want to re-do my gas tanks before putting them back in, but
> stripping
> > the insides seems to be a problem.
> Hi Chris.
>
> I bought a 20 gallon plastic garbage can and 15 gallons of Zep industrial
> solvent to use as a dunk tank.Total cost was less than $100. It really
> worked well on the old paint and coatings. I media blasted the tanks
inside
> and out and powder coated the tanks and crossover tubes. It took just one
> quart of Standard Fuel Tank Sealer to recoat the insides of the tanks and
> tubes. The process takes about ten days to complete. Other guys have done
> this same thing and the tanks turn out really nice. Robin Young B9471769
|