John
You are correct. Red to + side of coil, black goes to - side of
coil. Set the Ignitor box to sleeve gap to about .030" inside the
distributor and your ready to go.
Ron Fraser
-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net] On
Behalf Of Carmods@aol.com
Sent: Saturday, May 17, 2003 9:34 AM
To: tigers@autox.team.net
Subject: Pertronix Wiring
I am hooking up my engine after replacement. I have a Pertronix in the
distributor with a red and a black wire. I remember that the red wire goes
to
the plus side of the coil but, perhaps due to old age I have forgotten for
sure where the black wire goes. I would assume that it goes to the minus but
I try not to assume. Can someone help?
John Logan
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.481 / Virus Database: 277 - Release Date: 5/13/2003
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.481 / Virus Database: 277 - Release Date: 5/13/2003
|