tigers
[Top] [All Lists]

RE: bent pushrod

To: "'Arnie Sugar'" <asugar@hwageo.com>, tigers@autox.team.net
Subject: RE: bent pushrod
From: "Palmer, Robert L." <RPalmer@brobeck.com>
Date: Mon, 24 Jun 2002 14:03:04 -0700
Arnie,

You need to use hardened pushrods if you use guideplates. Also, stock rocker
arms may not have enough clearance for your high lift cam. The third
possibility is there is not enough clearance for the springs. Many high
performance springs, especially the double or triple spring type, require
special machining of the spring seats. This list is in the order of
increasing probability.

Bob

=======================================================
This email message is for the sole use of the intended recipient(s) and may 
contain confidential and privileged information. Any unauthorized review, use, 
disclosure or distribution is prohibited. If you are not the intended 
recipient, please contact the sender by reply email and destroy all copies of 
the original message.
To reply to our email administrator directly, send an email to 
postmaster@brobeck.com
BROBECK PHLEGER & HARRISON LLP
http://www.brobeck.com

<Prev in Thread] Current Thread [Next in Thread>