Tim, this is excellent advise. I had an etch prime, and 2 part epoxy
prime, before the body man got the car. Other friend with dipping had
no etch prime, and body man had to go through entire car, at owners
expense, to prep car.
A house or car, is only as good as its foundation.
Larry
"Ronak, TP (Timothy)" wrote:
>
> Dan,
> Be sure that you have whoever does your car use a self etching and
> non-sanding type of "primer" to facilitate recoating without have to sand
> every square inch of your car again. If you are interested in a Sikkens
> system approach I can certainly give you the heads up. I just last month saw
> a car in Dale Akezewski's shop primed by someone other than them and now the
> car is along the way in the restoration process and the owner is faced with
> having to MANUALLY sand all of the primer off inside and out as it is coming
> of in sheets. Whatever you do you are building quality from the ground coat
> up SO DON"T CHEAP OUT!!!! A "lifetime warranty" is worth every penny.
>
> Best Regards,
>
> Tim Ronak
> Business Development Manager
> Akzo Nobel Coatings
> OFF: (949) 305-5393
> VM: (800) 234-6747 ext. 2257#
#################################################################
#################################################################
#################################################################
#####
#####
#####
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#####
#####
#####
#################################################################
#################################################################
#################################################################
|