I am upgrading to a 1.5 degree cambered rear end for the TIGER with larger
brakes . My current 9" rear is available with the following specifications:
55 3/8" track (wheel mounting face to mounting face)
Speedway Engineering full floating aluminum hubs and steel tubes
5 on 4 3/4" wheel bolt pattern with 3"x1/2" studs
12" x.810" curved vane rotors
WILWOOD Billet Dynolite calipers with 4x1.38" pistons
28 or 31 spline solid axles, your choice, dependent on the carrier
of your choice
Tubes have been welded on to shrink the tube, to add a little
negative camber
Brackets for coil over system and trailing arms could be removed to
use stock leaf springs.
Pictures available upon request
$500.00 plus shipping (the brake components and hubs alone are
double that new)
BARRY SCHONBERGER
Evansville, IN 47712
(812)464-1862
(812)465-7021 fax
bkschonb@usi.edu
|