Mark,
The pieces will be stored in computer to be cut out when required. I can not
speak for Paul but if I read him right he will probably sell the piece as he
will first ensure that the prototype fits and then make final tweaking then
produce a bunch for those that want them. I will talk to Paul Friday about
it and clarify what he wants to do.
Best Regards,
Tim Ronak
Business Development Manager
Akzo Nobel Coatings
OFF: (949) 305-5393
VM: (800) 234-6747 ext. 2257#
-----Original Message-----
From: Mark Meswarb [mailto:meswarb@hotmail.com]
Sent: Thursday, March 14, 2002 6:47 AM
To: Ronak, Timothy P
Subject: Re: Cooling
Tim,
I had designed one of these, but only in my head. Planned to mount it on
the crossmember crimp. If yours works out, could you see what your fab-man
would charge to build another?
Thanks,
Mark
>From: "Ronak, TP (Timothy)" <Timothy.P.Ronak@akzo-nobel.com>
>Reply-To: "Ronak, TP (Timothy)" <Timothy.P.Ronak@akzo-nobel.com>
>To: "Tiger News Group List (E-mail)" <tigers@autox.team.net>
>Subject: Cooling
>Date: Wed, 13 Mar 2002 16:02:39 -0600
>
>Listers,
>I have just finished the lower air scraper designed to use 1990's
>technology
>to hopefully cure the cooling difficulties of the Tiger. Paul Parretti has
>graciously fabbed the piece up from a templete I made for my car with his
>VERY sophisticated cutting equipment (He indicated that he could only cut
>it
>within .006 thousands of an inch. I will be picking it up on Friday and
>hope
>to have it fitted by the weekend once it is black. It should look like the
>bibs that hang down from 88-93 Mustangs.
>Paul also has made very nice aluminum block off plates for the Rad support
>that have knockouts for the horns.
>At speed my car used to have the hood straining to open and I am hoping
>this
>little modification is the "holy grail" of cooling for the Tigers.
>I tried to communicate this via email before but it was too difficult to
>explain. It is really easy to see in the email. If anyone is interested I
>will be taking pictures again of the project.
>
>Best Regards,
>
>Tim Ronak
>Business Development Manager
>Akzo Nobel Coatings
>OFF: (949) 305-5393
>VM: (800) 234-6747 ext. 2257#
_________________________________________________________________
|