Steve, sorry to beg the differ, but I put roller rockers on the Tiger, 1990
5.0L, and I had to remove the baffles, and do a little grinding. These heads
have pedestal mounts for the rockers. On a stock 60's head it may not be
needed. I have not had any problem with oil splash, etc, with the removal of
the baffles.
Larry
Steve Laifman wrote:
> Duncan,
>
> You do not have to remove the inner steel splash shield of the TIGER
> aluminum valve covers for roller rocker arms. BUT, you do have to make
> circular clearance holes for the central nut. A good hole saw can do the job.
>
> Steve
> --
> ____________________________
> Steve Laifman
> Editor
> <http://www.TigersUnited.com>
|