Hi Steve. I have the T-5, with the recommended ATF, and a Pro Five
shifter. It is the best shifter I have ever experienced. Precise, short
throw, and with Pro Five shifter, no missed 2nd to 3rd shifts, which is
prone to the stock T-5 shifter.
Larry Wright is using synthetic fluid in his T-5, and for the extra cost,
you might try it. Oil was never a recommended fluid. If synthetic fluid
is not fix, go back to shop, and have them right the problem.
Larry
SJC Worldwide wrote:
> Hello Sunbeamers:
> Here's a transmission question. Most of you know this, but for those who
> don't, I have a hybred 5 speed trans. in my MK1A Tiger. It's a
> Ford/Mustang box with a Chevy S-10 pickup tail housing (the shifter
> almost lined up with the stock shifter hole). The gearing, etc., is
> pretty much perfect and I'm very happy with that. The shifting, since
> day one (it was a used/rebuilt trans) has been very notchy, and seems to
> have gotten a bit worse. I have to almost force it into 1st from neutral
> sometimes, and other gears aren't much better. The shop I bought the
> trans. from said it would "shift like butter". I guess they didn't
> explain that they meant dried up, hard as a rock butter. Once in a
> while, a shift here and there seems easier, which might relate to RPMs
> (or not). I've tried it with 30 weight oil, and also auto. trans fluid,
> and one or the other doesn't seem to make much difference, although the
> ATF I have in now seems to make it marginally easier to shift when in
> colder weather (cold for southern California, anyway). The shifter
> assembly I got with the trans when I bought it is a generic Chevy piece.
>
> To clarify what I mean by "notchy", I have to usually almost force the
> shifter into gear, but the shift lever itself is not stiff, if that
> makes sense. It moves freely in neutral, and once I get it past the
> entry point for the gear in question.
>
> There doesn't seem to be any advantage to lubing it (which I've tried).
> Shifter length is about the same as the stock Tiger shifter. In the hope
> that maybe my notchy, stiff shifting might be related to the shifter
> assembly, and not synchros, or other expensive internal happenings,
> (supposedly, new synchros, etc. had been fitted when the box was
> rebuilt), are there any ideas out there for alternative, better
> (smoother) shifting shifter assemblies (remembering that the tail
> housing is Chevy, not Ford in this case)?
>
> Steve Sage
> 1967 MK1A
|