I am the second owner of a 66 Mustang. Bought it in 1978. It has a 6 blade,
all steel fan. The diameter is 17 inches. I cannot see any part numbers
while it is on the car. My memory tells me that I have seen a Ford logo on
the fan during past repairs. According to the shop manuals this is not the
correct fan for my car. Mine has no A/C, the A/C equipped cars are supposed
to have the 6 blade fan. The blades have approximately 2 inches of twist in
them. I mean they measure 2 inches thick in a direction the air flows.
How does this amount of pitch compare to the much sought after Canadian fan?
Erich
----- Original Message -----
From: <SFordRB@aol.com>
To: <tigers@autox.team.net>
Sent: Wednesday, August 29, 2001 1:11 PM
Subject: Fan numbers
> I have found a Ford six blade fan with the numbers CFC5ZEA. This fan came
off
> of a Mustang and is purported to be from a Hi-Po 289 GTA. It is fifteen
> inches in diameter and has the tips of the blades curved back. Somebody,
shed
> some light on this as I seem unable to track down any info.
>
> Dr. Moonstone
|