Frank Marrone wrote:
>
> Were the seat rail mounts on the floor pan originally covered with vinyl?
> I've been told that portions of the metal ledge that passes under the fronts
> of the seats and over the drive shaft tunnel were, this makes sense because
> some of this is visible after the carpet and the rest of the interior is
> installed. Since you can sometimes sort of see the seat rail mounts I was
> wondering about these too.
>
> Thanks in advance!
>
> Frank
> B9471116
Frank,
The seat rails themselves were plated with what looks like cadmium.
These, in turn and were bolted to a raised painted steel platform/nut
holder welded to the floor panels, and also black. A good deal of the
floor panel is covered with an asphalt based sound deadener, elsewhere.
There is an vinyl edge piece enhancing the rear dropped ledge where the
seats reside, but it is not deep.
This are my observations on a Mk I. Other models may have been
different, but I doubt it.
Steve
--
Steve Laifman < Find out what is most >
B9472289 < important in your life >
< and don't let it get away!>
<SLaifman@SoCal.RR.com>
<http://www.TigersUnited.com/gallery/SteveLaifman.asp>
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|