Tom Hall wrote:
> At 04:05 PM 2/22/01 -0800, you wrote:
>
> >the distributor, which is apparently an original Ford/Tiger optional
> >piece and 35 years old,
>
> >Steve Sage
> >1967 MK1A
>
> Whoa!!! If I remember correctly your running a late 302 roller cam engine
> and you installed the "old" distributor out of the 260 ?? The cast iron
> distributor gear on the early distributor will be eaten alive by the steel
> cam gear on the roller cam. ...................
Hello Tom:
I ended up installing a hi-po 289 instead of the 302 so I think I'm all right
on the distributor, at least as far as compatability goes.
Steve
|