To: | "Theo Smit" <tsmit@isotel.com>, |
---|---|
Subject: | RE: cracked oil line. |
From: | "Allan Connell, Jr." <alcon@home.com> |
Date: | Fri, 5 Nov 1999 17:27:27 -0800 |
Theo Said <Snip> 2. The oil pump is toast and/or the relief valve is sticking. When the pan comes off, a new pump will go in anyway. Any suggestions as to what type? <Snip> Theo, My suggestion would be a Boss 302 oil pump. Cannot recall the specifics as to part number and the like, but mind delivers a healthy 75 psi at speed, cold and about 50-55 psi hot. Even at idle it rarely drops below 30-35 psi. This is using multi-grade BTW, 10-40w. Regards, Allan B9472373 |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | RE: Temperature drop across a rad, Ronak, TP (Timothy) |
---|---|
Next by Date: | Breathing, Allan Connell, Jr. |
Previous by Thread: | RE: cracked oil line., Bob Palmer |
Next by Thread: | Breathing, Allan Connell, Jr. |
Indexes: | [Date] [Thread] [Top] [All Lists] |