At 06:17 PM 9/19/99 -1000, you wrote:
>Today i used the tech tip to upgrade my 7000rpm tack to be used with a MDS
>ignition. My engine does not run as of yet so i can not say if it works but
>i did encounter a few small problems. the part numbers listed for the
>capicitor had the wrong unit of measurement in the tech tip. the tech tip
>says use .0047MFD to .01MFD and gives the part numbers 272-134 and 272-130.
>P/N 272-134 was outside the range specified and the units of measurement on
>272-130 was .0047uF not MFD. i hope i used the correct part. it was really
>easy to install and the tech tip was very easy to follow. i do need a new
>gasket for the bezel, where can i get that?
>Thanks
>Chris
>
The "u" in "uF" is actually a Greek letter "mu" ( but this mail doesn't
like symbols) that stands for "micro" in this case. uF and MFD are exactly
the same
if you are using Radio shack crap ( sorry, parts).
James Barrett Tiger II 351C and others
|