Folks,
Today while driving to work and worrying about the smoke
(which has subsided a bunch now that my oil level is down and I stay out
of overdrive) I found another wierd Lucas phenomena. When I operate the
driver's side signal light it works, until I touch the brake, then it stops.
Signal lights restart as soon as I let off the brake. The passenger side
signal light is not affected by the brake lights. Up until today, both
sides worked fine. I do have the wiring diagram for a Tiger II.
Will remove and replace the lamp housing screws to attempt to improve
the ground return on the drivers side. Doesn't make any since that
the power source for the signal lights is loose as the passenger's
side light works fine and there is only one wire for both sides.
James Barrett Tiger II 351C and others
|