>The Torker is a HIGH rise manifold. The Carter is about the same as the
>Holley. Don't believe it will clear, but you can always test it, if installed,
>with a wad of aluminum foil on top of the carb.
>From Edelbrock's web site, the heights are:
A B
Performer 289 3.50" 4.75"
Torker II 4.00" 5.18"
Performer RPM 4.30" 5.50"
I believe a Performer 289 will clear but I don't know about a Performer
RPM. If the RPM does, then a Torker II should as well. With only a
1/2" taller carb base than a Performer 289, it's possible it will. The air
cleaner flange is a little lower on the Carter so that will help some.
Dan Jones
|