----------
> From: Doug Mallory <rdmallory@earthling.net>
> Subject: Re: "Tiger" Valve covers
> Date: Monday, April 12, 1999 4:11 AM
>
> On my engine with Crane Roller Rockers and the 460 lift cam the rocker
arm
> hits not just the nut. I had to remove the baffles and mill some of the
valve
> cover
> for clearance. Never tried adding oil with the engine running ......
>
> Doug
>
I'm running a set of Competion Cam's stainless roller rockers that are
considerably smaller in size than my previous aluminum roller rockers
(Harland Sharp) but you do need to pay attention to pushrod clearance in
the head slots.
Bob
|