Doug, et Listers,
A few months back, Bill Martin made available some extra long bolts he made
up that allowed you to put a nut on the top side. Apparently, this method
was used on some of the Sunbeam competition and rallye cars. I believe this
would help if done in conjunction with some special load-spreading washers.
Otherwise, I don't quite see what the benefit is. But then there's a lot of
things I don't understand.
Bob
At 08:20 PM 3/19/99 -0500, Doug Mallory wrote:
>I used AN bolts and safety wired mine.
>That is why I remove my engine from the top.
>
>Doug
>
Robert L. Palmer
Dept. of AMES, Univ. of Calif., San Diego
rpalmer@ames.ucsd.edu
rpalmer@cts.com
|