STUART_BRENNAN@HP-Andover-om3.om.hp.com wrote:
> Anyway, I got a 3 x 35 tube core, 15 fins per inch by my measure. The
> resulting radiator fit fine, good stock fan clearance, mounting holes
> lined up, etc, with only a couple little things attributable to the
> shop, not the core. $280 for the job, including a new American style
> drain valve. Cooled much better on our last 65F day (winter's here
> now), but the real test will come in the spring.
>
> Stu
>
Stu,
An excerpt from my 'cooling' e-mail on my custom Modine. Sounds comparable to
yours, except mine has 1 more row for $300. Works fine at 105F outside.
'Fans' IS needed. 1 6 blade, and one electric (for bumper to bumper in hot
weather).
"7) Replace original, or older design 4 row, with new high density, high
performance radiator. Same thickness as original 3 row, and requires no
mods of tanks. Modine H 69 H Cross flow. 18 1/2 W x 15 1/2 high. Four
parallel rows of tubes, 36 tubes/row, each 3/8 inch deep by 0.080 wide
externally. 14 fins/per inch fin density. This is about $300, built
by radiator shop, and well worth it."
--
Steve Laifman < One first kiss, >
B9472289 < one first love, and >
< one first win, is all >
< you get in this life. >
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|