You won't like the answer. basically, Unless they are after market deal, you'll
have to get a really big puller, and remove the Nut, and then the hub from the
end of the axle. They are a VERY tight press fit with a woodfus key inside.
One of the Alpine/Tiger web pages shows how to do it, but I don't rememebr which
it is. There are no clips to remove, since this axle is a third member type.
You can't get inside untill the axles are removed.
Rich
-----Original Message-----
From: Bill Gullatt <bgullatt@traveller.com>
To: alpines@autox.team.net <alpines@autox.team.net>; tigers@autox.team.net
<tigers@autox.team.net>
Date: Thursday, July 02, 1998 1:06 PM
Subject: HELP! Series V Alpine
>Sunbeamers,
>
>I have a miss matched differential. One side knock off one side 4 bolt.
>Where is the retainer clip that holds the axle in. I have no experience
>with deifferintials and don't want to remove what I dont have to.
>
>Bill Gullatt
|