>Help!
>
>I just reassembled my Tiger after a total brakejob. My problem is that
>when I=B4ve used the brakes they stay applied and will not come loose until
>I turn off the engine and push the brake pedal once more.
>Something with the booster??
>
>Thomas Malmstr=F6m, Sweden
>B382001500LRFXE
Thomas, my Mk1 did the same thing, so I removed the brake booster and no
more problems. I used a double female fitting at each end and a short
piece of brake line between them to make it all work without the booster,
it's a little harder to apply the brakes but not that bad. Did your wheels
heat up like mine did? Mine got so hot they were smoking before I made the
change.
Hope this helps
Regards Armand Ritchie
B9470219
California USA
ritchie@mcn.org
Armand & Lorie Ritchie
|