At 11:04 AM 6/5/98 -0500, you wrote:
snip...
> On the subject of Panhard rods, MkII's have the Panhard rod mounting
> switched to the opposite side, I was told this was to correctly
> counteract the torque from the engine.
Jeff
Jeff,
The Panhard rod on my Tiger II is mounted to the frame on the
drivers side above the axle. Were the mounts for the rods of the older
Tigers on the passanger side? My mounting point broke back in the
early 70's. Have not had a problem since rewelding it.
James Barrett Tiger II 351C and others
|