Lannie,
My guess is that the cable you installed is to tight at the speedo, Norm
and I just put in a new cable in a MKII and I had to loosen the cable at
the speedo head which stopped the bouncing. If the cable is to tight into
the speedo head it can damage it. As for the speedo gear you can still get
them from your local Ford dealer. Good luck
Bill
On Tue, 2 Jun 1998 LannieH@aol.com wrote:
> Last summer I decided to change to change my speedometer cable gear, since my
> speedometer ran about 10% fast, & while I was at it I also replaced the cable.
> Before this the only problem I had was the fast speedometer, but now I have a
> new problem. It goes to slow, I think I need to put in a 20 tooth gear, &
> when I get to about to 60 mph the needle starts bouncing. It will bounce from
> around 50 to 80 to 90 mph. I have no Idea how fast I am going.
>
> Any suggestions would be appreciated.
>
> Thank you,
> Lannie Hunton
> 1965 Tiger
> B9471395
>
|