I know you said that the paint was primo, but complete can it be
under, and up inside the front nose of the car where the original emblem
pins stuck through. I can't imagine NOT being able to determin where the
original holes were. This is not to say that these original holes will work
for the new emblems (letters), but you should at least be able to see where
they used to be.
Rich
> ----------
> From: Steve Laifman[SMTP:laifman@flash.net]
> Reply To: Steve Laifman
> Sent: Saturday, March 07, 1998 4:02 AM
> To: SDeane7000
> Cc: steve@ramus.com; tigers@autox.team.net
> Subject: Re: Lettering
>
>
>
> SDeane7000 wrote:
>
> > Steve & Doug,
> >
> > How about a poor man's magnaflux? Would a magnet on the back side of
> the hood
> > and some iron filings on the front indicate the holes??
> >
> > Scott 3821001187
>
> Great idea, Scott. I would recommend a "powder" over filings, and would
> use
> something like Saran wrap on the paint side to keep the iron away from the
> paint
> surface. Can't use a "puny" magnet though. Try a discarded Big Speaker
> magnet.
> You might want to put a big handle on it, so you can get it off the inside
> without a come-a-long. Another thin sheet of conforming aluminum, between
> the
> magnet and the inner steel might allow a prying action to "break" the
> hold.
>
> Steve
>
>
> --
> Steve Laifman < One first kiss, >
> B9472289 < one first love, and >
> < one first win, is all >
> < you get in this life. >
>
>
> _/_/_/_/_/_/_/
> _/ _/_/_/ _/_/_/ _/
> _/ _/ _/ _/ _/ _/ _/_/_/_/
> _/ _/ _/ _/ _/ _/ _/
> _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> _/
> _/_/_/
>
>
|