Wayne,
Re-building the Girling MkIIA is not an easy task. I hope that you
checked the bore surface of the Vacuum canister, as well as the
hydraulics. One problem I've heard about is that the "kit" has a seal
for the large vacuum piston that is too large, which can cause binding.
The experienced re-builder knows this, and cuts it to the correct length
so it doesn't bind. There probably is too little of the red grease in
the kit. Again, a professional would have a larger supply, and would
slop it up good. The same material is also used in rebuild kits for the
other hydraulics from Girling.
Steve
--
Steve Laifman < One first kiss, >
B9472289 < one first love, and >
< one first win, is all >
< you get in this life. >
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|