>
> Roland,
>
> Right you are, but those "easy to change" cable end gears come in a
> limited range of teeth, and are a rather coarse adjustment as they
> usually have about 14 teeth, and you can only change them by a full
> tooth. That's about 7%, and doesn't take care of non-linear errors over
> the range of the speeds.
>
> Steve
Hey, after 20 years I was so grateful to see the needle on my speedo
move, I figured that was good enough. Maybe one of these days I'll try
a different gear to see if I can get a more accurate reading.
Roland
|