At 02:49 AM 7/17/97 +0000, you wrote:
>Coincidently I've been contemplating the sensitivity of the mag pick up on
>these tachs. If you wanted to supply a voltage pulse metallicaly to the
>terminals where the "bar" connects across the terminals on the back of the
>tach, what voltage need you apply? I'm assuming that the amplifier is
>actually a voltage amp but I guess it could be current. I want to use a
>spare Series V Alpine tach in an application where a voltage pulse is
>provided. I'm thinking I could scale the supplied pulse with some
>resistors then apply it to the terminals where the bar attaches.
>
>I could just cut the coil wire and wrap it around the bar and then
>re-attach it to the original wiring I guess.
>
>
>
>Frank Marrone MK I Tiger B9471116
>marrone@wco.com 1966 LTD
> '79 Spitfire
> Yamaha Seca 900 (aka XJ900RK)
I believe that Tiger Tom has modified tachs for use with electronic
ignitions which sounds like what you might be for.
Doug Pruitt
Frederick, Maryland
All generalisations are wrong.
|